|
|
 |
MXL QM has been engineered to help you increasing your dragster reliability and overall performance.
After the great success of MyChron3 660, AIM makes a step forward.
The new MXL QM, in fact, is a tool designed and developed for drag racers (as QM for quarter mile tells us) but with the potentials of a high tech logger as MXL, one of the world most successful data acquisition system, is.
High performance digital dash with plenty of channels and the easiest connection to the most important ECUs on the market, based on eighth mile and quarter mile competition, MXL QM is specifically designed for Drag Races.
MXL QM starts with a manual switch - following NHRA rules - and stores runs and not laps.
|
|
|
|
It samples RPM, up to 4 speed inputs, up to 12 analogue channels and additional channels through ECU interface (via CAN bus or RS232).
Moreover it can be easily configured using the dedicated DragOn software.
MXL QM can be interfaced (via proprietary CAN bus) with virtually infinite LCU-ONE.
All data are stored in the 8 MB internal memory and can be downloaded to a PC through USB connection (using both the USB cable or the optional Data key).
QMAn, the powerful software properly developed by AIM for this logger, lets you create your personal ET database and analyse performance data.
|
|
|
|
 |
Data of an entire racing week-end can be reviewed directly on the wide backlighted display, for immediate evaluation of the most important measures.
There is virtually no limit to the number of sensors you can connect to MXL QM: engine rpm, clutch rpm, driveshaft rpm, speed sensors, k-thermocouples, thermo resistors, pressure transducers for oil, water and brake, potentiometers, accelerometers, gyrometers. |
|
|
|
|
| Technical characteristics |
|
 |
RPM graphical and numerical view |
|
|
Configurable RPM scaling (from 4.000 to 22.000) |
|
|
Gear number: calculated or sampled from "on-board" sensor |
|
|
10 shift lights: Green - Yellow - Red |
|
|
6 freely configurable max/min alarm lights |
|
|
Internal data acquisition system with 8 MB non volatile memory |
|
|
Up to 2 kHz sampling frequency (200 Hz for each channel) |
|
|
Up to 4 speed inputs |
|
|
Up to 12 analogue channels |
|
|
Additional channels through ECU interface (via CAN bus or RS232) |
|
|
Proprietary AIM CAN bus interface with virtually infinite LCU-ONE lambda controllers and/or DaVid Video Recording System |
|
|
Free DragOn and QMAn software to easily configure the gauge and analyse acquired data
|
|
|
| Features |
|
|
System dimensions: 174 x 110 mm |
|
|
Display dimensions : 140 x 67 mm |
|
|
Waterproof IP65 |
|
|
|
|
|
